14
Shortcut Key Operations
Here is a list of the functions that can be performed by pressing multiple buttons, or using the TIME/VALUE dial
in conjunction with a button.
■
FUNCTION buttons
■
TRACK/STATUS,INPUT, and FX buttons
(*1) When buttons are showing track conditions
(*2) When [CH EDIT] is lit.
(*3) Hold down button of an odd-numbered channel, and press button of the next highest-numbered (even-numbered) channel.
■
Transport Control buttons
■
PREVIOUS/NEXT/TAP MARKER buttons
(*4) When PREVIOUS/NEXT Sw is “MARKER.”
(*5) When PREVIOUS/NEXT Sw is “PHRASE.”
■
AUTOMIX
[F1 (PROJ)]
To the PROJECT LIST screen
[F2 (TRACK)]
To the TRACK REGION/PHRASE EDIT MENU screen
[F3 (EFFECT)]
To the EFFECT VIEW screen
[F4 (UTIL)]
To the UTILITY MENU screen
[F5 (WAVE)]
Display wave form
[F6 (MARKER)]
Show MARKER dialog
Hold [TRACK/STATUS] (*1)
To the QUCIK ROUTING screen
(When using the Quick Routing screen)
[TRACK/STATUS]+ [CLEAR]
All track assignments are canceled.
•
[CLEAR] + [TRACK/STATUS] (1–17/18) (*2)
•
[CLEAR] + INPUT [1]–[10]
•
[CLEAR] + [FX1]–[FX6]
Adjust the each channel faders to set the “0 dB,” and the PAN (BALANCE)
knobs to set the “Center.”
•
[TRACK/STATUS] + [TRACK/STATUS]
(*2)(*3)
•
INPUT [1]+[2] – [9]+[10] (*3)
•
[FX1] + [FX2] – [FX5] + [FX6] (*3)
Channel Link mode on/off
[SHIFT] + [ZERO]
Store current song data to the disk drive
[SHIFT] + [REW]
Moves to the first recorded audio of the project.
[SHIFT] + [FF]
Moves to the last recorded audio of the project.
(after shutdown) [SHIFT] + [PLAY]
Restart
[REC] + [TRACK/STATUS] (1–17/18)
Switch the status to REC
[STOP] + [TRACK/STATUS] (1–17/18)
Switch the status to PLAY
[SHIFT] + [PREVIOUS]
If there is a phrase at the current location, move to the beginning of that phrase. (*4)
If not, move to the end of the previous phrase. (*4)
Move to the previous marker. (*5)
[SHIFT] + [NEXT]
If there is a phrase at the current location, move to the end of that phrase. (*4)
If not, move to the beginning of the next phrase. (*4)
Move to the next marker. (*5)
[CD-RW] + [TAP MARKER]
Register a marker for audio CD track number
[CLEAR] + [TAP MARKER]
Erase a marker
[SHIFT] + [CLEAR] + [TAP MARKER]
→
[ENTER/YES]
Erase all markers
[SHIFT] + [TAP MARKER]
To the TEMPO MAP screen
[SHIFT] + [AUTOMIX]
To the AUTOMIX SETUP screen
[AUTOMIX] + [TAP MARKER (SNAPSHOT)]
Stores a snapshot (when Automix is “on.”)
[AUTOMIX] + [REC (AUTOMIX REC)]
Automix real time recording (when Automix is “on.”)
VS-2000_e.book 14 ページ ２００５年１２月１２日 月曜日 午後４時５４分
To Next Page
Loading...
