15
Shortcut Key Operations
■
LOCATOR/SCENE buttons
■
IN/OUT/FROM/TO Buttons
■
A.PUNCH/LOOP Buttons
■
Other
(*6) When the VS20-VGA (sold separately) VGA/mouse expansion is installed. The VS20-VGA (sold separately) will be supported by system
version 2.00 and later.
■
Mouse Operation
(*7)
(*7) When the VS20-VGA (sold separately) VGA/mouse expansion is installed. The VS20-VGA (sold separately) will be supported by system
version 2.00 and later.
[LOCATOR]
→
[CLEAR] +
[TRACK/STATUS] (1–17/18)
Clear the setting of locators
Hold [LOCATOR]
Switch the locator bank (when locator mode is “on.”)
[SHIFT] + [LOCATOR (SCENE)]
→
[TRACK/STATUS] (1–17/18)
Clear the setting of scenes
Hold [SHIFT] + [LOCATOR (SCENE)]
Switch the scene bank (when scene mode is “on.”)
[CLEAR] + [IN]
Clear the track edit in point
[CLEAR] + [OUT]
Clear the track edit out point
[CLEAR] + [FROM]
Clear the track edit from point
[CLEAR] + [TO]
Clear the track edit to point
[SHIFT] + [A. PUNCH] or [LOOP]
To the AUTO PUCH punch in/out point setting screen
[A.PUNCH] + [IN]
Register the auto punch-in point
[A.PUNCH] + [OUT]
Register the auto punch-out point
[A.PUNCH] + [CLEAR] + [IN]
Clear the auto punch-in point
[A.PUNCH] + [CLEAR] + [OUT]
Clear the auto punch-out point
[A.PUNCH] + [TAP MARKER]
Register the auto punch-in point and clear the auto punch-out point.
[LOOP] + [FROM]
Register the loop-from point
[LOOP] + [TO]
Register the loop-to point
[LOOP] + [CLEAR] + [FROM]
Clear the loop-from point
[LOOP] + [CLEAR] + [TO]
Clear the loop-to point
[LOOP] + [TAP MARKER]
Register the loop-from point and clear the loop-to point.
[SHIFT] + [CD-RW]
To the MASTERING ROOM screen
[SHIFT] + [HOME]
Switch the Graphic display (HOME screen)
[SHIFT] + [UNDO (REDO)]
Redo function (when the UNDO indicator is lit)
[SHIFT] + [EZ ROUTING]
To the Parameter View screen of V-Track
[SHIFT] + [PAGE]
The JUNP dialog appears.
[SHIFT] + [ ] [ ]
Zoom to change the number of tracks appearing in the playlist display.
[SHIFT] + [ ] [ ]
Change of the time axis display width of the playlist.
[SHIFT] + TIME/VALUE dial
Modify the value at 10 times the usual speed. When adjusting the channel level
and AUX Send level, value is changed per 0.1 dB. In Play condition when the
cursor is displayed at the sub frame of the time code display, move the current
time in units of approximately 1/100 frame.
[SHIFT] + [SOLO]
All solo mode is turned off
[SHIFT] + [SHIFT]+[SOLO (MUTE)]
All mute mode is turned off
[CLEAR] + Fader
Temporarily unlink the fader from its group so you can adjust its level
independently.
[HOME] + The VS-2000 turn on (*6)
Select the LCD as the main display.
[HOME] + [F6 (VGA
↔
LCD)] (*6)
Switch the operation display
[SHIFT] + Dropping
Copy the data.
VS-2000_e.book 15 ページ ２００５年１２月１２日 月曜日 午後４時５４分
To Next Page
Loading...
