59
MIDI Implementation
(*1) Mixer Level Table
+—————+————————++—————+————————++—————+————————++—————+————————+
|Data | Lev(dB)||Data | Lev(dB)||Data | Lev(dB)||Data | Lev(dB)|
+—————+————————++—————+————————++—————+————————++—————+————————+
| 0 | — Inf || 32 | —21.2 || 64 | — 9.3 || 96 | — 0.8 |
| 1 | —80.0 || 33 | —20.8 || 65 | — 9.0 || 97 | — 0.6 |
| 2 | —68.0 || 34 | —20.4 || 66 | — 8.8 || 98 | — 0.4 |
| 3 | —60.0 || 35 | —20.0 || 67 | — 8.6 || 99 | — 0.2 |
| 4 | —56.0 || 36 | —19.6 || 68 | — 8.4 || 100 | 0.0 |
| 5 | —53.0 || 37 | —19.2 || 69 | — 8.2 || 101 | 0.2 |
| 6 | —50.0 || 38 | —18.8 || 70 | — 8.0 || 102 | 0.4 |
| 7 | —48.0 || 39 | —18.4 || 71 | — 7.6 || 103 | 0.6 |
| 8 | —46.0 || 40 | —18.0 || 72 | — 7.3 || 104 | 0.8 |
| 9 | —44.0 || 41 | —17.6 || 73 | — 7.0 || 105 | 1.0 |
| 10 | —42.0 || 42 | —17.2 || 74 | — 6.6 || 106 | 1.3 |
| 11 | —40.0 || 43 | —16.8 || 75 | — 6.3 || 107 | 1.5 |
| 12 | —38.0 || 44 | —16.4 || 76 | — 6.0 || 108 | 1.8 |
| 13 | —36.0 || 45 | —16.0 || 77 | — 5.8 || 109 | 2.0 |
| 14 | —34.5 || 46 | —15.6 || 78 | — 5.5 || 110 | 2.3 |
| 15 | —33.0 || 47 | —15.2 || 79 | — 5.3 || 111 | 2.5 |
| 16 | —32.0 || 48 | —14.8 || 80 | — 5.0 || 112 | 2.8 |
| 17 | —31.0 || 49 | —14.4 || 81 | — 4.8 || 113 | 3.0 |
| 18 | —30.0 || 50 | —14.0 || 82 | — 4.6 || 114 | 3.3 |
| 19 | —29.0 || 51 | —13.6 || 83 | — 4.4 || 115 | 3.5 |
| 20 | —28.0 || 52 | —13.2 || 84 | — 4.2 || 116 | 3.8 |
| 21 | —27.2 || 53 | —12.8 || 85 | — 4.0 || 117 | 4.0 |
| 22 | —26.4 || 54 | —12.4 || 86 | — 3.6 || 118 | 4.2 |
| 23 | —25.6 || 55 | —12.0 || 87 | — 3.3 || 119 | 4.4 |
| 24 | —24.8 || 56 | —11.6 || 88 | — 3.0 || 120 | 4.6 |
| 25 | —24.0 || 57 | —11.3 || 89 | — 2.6 || 121 | 4.8 |
| 26 | —23.6 || 58 | —11.0 || 90 | — 2.3 || 122 | 5.0 |
| 27 | —23.2 || 59 | —10.6 || 91 | — 2.0 || 123 | 5.2 |
| 28 | —22.8 || 60 | —10.3 || 92 | — 1.8 || 124 | 5.4 |
| 29 | —22.4 || 61 | —10.0 || 93 | — 1.5 || 125 | 5.6 |
| 30 | —22.0 || 62 | — 9.8 || 94 | — 1.3 || 126 | 5.8 |
| 31 | —21.6 || 63 | — 9.5 || 95 | — 1.0 || 127 | 6.0 |
+—————+————————++—————+————————++—————+————————++—————+————————+
(*2) Value and switching Track status corresponds as follows.
(1) While VS-2000 stops
Value: 0-41 42-83 84-127
--------------------------------------------------------------------------------------------------------------------------
Status:
OFF -> OFF OFF -> REC
OFF -> PLAY
PLAY -> OFF PLAY -> REC PLAY -> PLAY
REC -> OFF REC -> REC REC -> PLAY
(2) While play back/recording
Value: 0-41 42-83 84-127
--------------------------------------------------------------------------------------------------------------------------
Status:
OFF -> X OFF -> X OFF -> PLAY
PLAY -> OFF PLAY -> X PLAY -> PLAY
REC -> X REC -> REC REC -> X
(*) X = Ignored
❍
Bank Select (MSB/LSB)
Switches the effect bank.
Status Second Third
BnH 00H mmH
BnH 20H llH
n = MIDI Channel No.:
0H - 5H (ch.1 = FX1 ch.2 = FX2 ch.3 = FX3 ch.4 = FX4 ch.5 = FX5 ch.6 = FX6)
mm = upper byte of bank number : 00H
ll = lower byte of bank number : 00H - 04H (0 - 4)
Bank Select | Program Change | Patch Number
MSB | LSB | |
------+-----+--------------------+---------------------
00H | 00H | 00H - 63H (0 - 99) | Preset #000 - #099
00H | 01H | 00H - 63H (0 - 99) | Preset #100 - #199
00H | 02H | 00H - 31H (0 - 49) | Preset #200 - #249
00H | 03H | 00H - 63H (0 - 99) | User #000 - #099
00H | 04H | 00H - 63H (0 - 99) | User #100 - #199
❍
Prtamento Time
If the HARMONY ASSIGN screen's USE EFFECT BOARD setting is On, this message is
received on the MIDI channel specified by the HARMONY ALGORITHM VIEW screen's
MIDI setting.
Status
Second Third
BnH 05H mmH
n = MIDI Channel No.: 0H - FH (ch.1-ch.16)
mm = Prtament Time : 0H - 7FH (0 - 127)
❍
General Purpose Controller 1
If the HARMONY ASSIGN screen's USE EFFECT BOARD setting is On, this message is
received on the MIDI channel number specified by the HARMONY ALGORITHM VIEW
screen's MIDI setting, and will control the formant value for HARMONY PART 1.
Status
Second Third
BnH 10H mmH
n = MIDI Channel No.: 0H - FH (ch.1-ch.16)
mm = PART1 Formant: 1H - 40H - 7FH (-63 - 0 - +63)
❍
General Purpose Controller 2
If the HARMONY ASSIGN screen's USE EFFECT BOARD setting is On, this message is
received on the MIDI channel number specified by the HARMONY ALGORITHM VIEW
screen's MIDI setting, and will control the formant value for HARMONY PART 2.
Status
Second Third
BnH 11H mmH
n = MIDI Channel No.: 0H - FH (ch.1-ch.16)
mm = PART2 Formant: 1H - 40H - 7FH (-63 - 0 - +63)
❍
General Purpose Controller 3
If the HARMONY ASSIGN screen's USE EFFECT BOARD setting is On, this message is
received on the MIDI channel number specified by the HARMONY ALGORITHM VIEW
screen's MIDI setting, and will control the formant value for HARMONY PART 3.
Status
Second Third
BnH 2H mmH
n = MIDI Channel No.: 0H - FH (ch.1-ch.16)
mm = PART3 Formant: 1H - 40H - 7FH (-63 - 0 - +63)
❍
General Purpose Controller 4
If the HARMONY ASSIGN screen's USE EFFECT BOARD setting is On, this message is
received on the MIDI channel number specified by the HARMONY ALGORITHM VIEW
screen's MIDI setting, and will control the formant value for HARMONY PART 4.
Status
Second Third
BnH 13H mmH
n = MIDI Channel No.: 0H - FH (ch.1-ch.16)
mm = PART4 Formant : 1H - 40H - 7FH (-63 - 0 - +63)
❍
Hold1
VS-2000 can receive when EFFECT C.C. Rx Sw in the UTILITY condition MIDI screen is
“On”, effect patch Vocoder2 effect (algorithm 28) is selected, and Vocoder2’s Hold
parameter is “MIDI.”
Status
Second Third
BnH 40H llH
n = MIDI Channel No.: 0,2,4H (ch.1 = FX1 ch.3 = FX3 ch.5 = FX5)
ll = Control Value : 00H - 7FH (0 - 127)
❍
Prtamento
If the HARMONY ASSIGN screen's USE EFFECT BOARD setting is On, this message is
received on the MIDI channel specified by the HARMONY ALGORITHM VIEW screen's
MIDI setting.
Status
Second Third
BnH 41H mmH
n = MIDI Channel No.: 0H - FH (ch.1-ch.16)
mm = Control Value : 0H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127, = ON
❍
Vibrato Rate
If the HARMONY ASSIGN screen's USE EFFECT BOARD setting is On, this message is
received on the MIDI channel specified by the HARMONY ALGORITHM VIEW screen's
MIDI setting.
Status
Second Third
BnH 4CH mmH
n = MIDI Channel No.: 0H - FH (ch.1-ch.16)
mm = Vibrato Rate : 0H - 7FH (0 - 127)
❍
Vibrato Depth
If the HARMONY ASSIGN screen's USE EFFECT BOARD setting is On, this message is
received on the MIDI channel specified by the HARMONY ALGORITHM VIEW screen's
MIDI setting.
Status
Second Third
BnH 4DH mmH
n = MIDI Channel No.: 0H - FH (ch.1-ch.16)
mm = Vibrato Depth : 0H - 7FH (0 - 127)
❍
Vibrato Delay
If the HARMONY ASSIGN screen's USE EFFECT BOARD setting is On, this message is
received on the MIDI channel specified by the HARMONY ALGORITHM VIEW screen's
MIDI setting.
Status
Second Third
BnH 4EH mmH
n = MIDI Channel No.: 0H - FH (ch.1-ch.16)
mm = Vibrato Delay : 0H - 7FH (0 - 127)
VS-2000_e.book 59 ページ ２００５年１２月１２日 月曜日 午後４時５４分
To Next Page
Loading...
