Play/Pause
Press Play/Pause to begin or stop playback of all selected loops.
Click
Press Click to control the tempo of the project and to turn the Click “ON” or “OFF”. When it is
set to “ON” it will play whenever the Play/Pause icon is touched. If you turn it “OFF” you will
still hear the click for the 1 bar count-in during recording.
Snap
Snap tightens up or “quantizes” your performances so they are perfectly in time.
Volume
Touch and drag the Volume Button directly up or down to raise or lower the volume of project.
In Song View the Instruments are arranged in 4 rows from top to bottom starting with one Multi
Instrument on top and three Solo Instruments below. There are 12 available loop slots per
instrument. On the iPad you can see all 12 loop slots on one screen.
On the iPhone you can view 4 loop slots per page and use the slot selection icon ( ) at the
bottom of the screen to navigate to the corresponding page.
5.5 Playing a Loop
While in the Song View there are several pre-recorded loops in NOISE for you to experiment
with. Touch the top left loop. You will hear a groove begin to play which will repeat every four
bars until you touch another loop in the same instrument, and then the second loop will begin
To Next Page
Loading...
