Hydraulic headland kits:
Hydraulic headland kits are available as options on the frames C8, C11, C12, C22,
C13, C23 for the ROLLTWIN spreaders and C10 for the ROLLMAX spreaders.
These headland kits allow spreading at the edge of the plot. It is possible to have
headland kits on the left or on the right or one on each side.
Weighing :
It is possible to equip the ROLLTWIN and ROLLMAX spreaders with a weighing
system. Weight information is detected by sensors on the drawbar and the axle. The
data is then memorised in the weight conrol box per client or plot. In addition to the
weighing system the user can have a data processing software for managing
customers or plots (storage up to 65,000 weighings). Also optionally available is a
compact printer equipped with a battery rechargeable at the mains that can publish
tickets with weight totals, per customer or plot.
To Next Page
Loading...