3 – Presentation of the vehicle
This manual is common to all spreaders in the ROLLAND range. It was designed to
give you all necessary information about the vehicle you have just purchased and to
allow you to get the get the most out of it.
DESCRIPTION :
The spreaders are equipped with either a single axle, rocker, tandem or tri axle.
They can also be equipped with the "ROLLFAST" hydraulic suspension.
They are mounted on a chassis with a drawbar, sprung or hydraulically adjustable.
Identification :
For full features of your trailer, refer to the conformity plate attached to the front right
of your vehicle. In addition, a tare plate sticker specifies the permissible gross
weight (GVWR) and unladen weight (UW). A stamped (serial number) is carried on
the vehicle chassis
This serial number is required for any exchange warranty with your dealership or the
factory
Tare sticker
Conformity plate
To Next Page
Loading...