Rollei Actioncam 8s Plus User Manual

4
ENGLISH
Waterproof Case
• Insert Camera into Waterproof Case
1. Ensure the case is clean.
2. Insert the camera and make sure the lens fits neatly in the lens cavity.
3. Close the locking clamps.
4. The camera can be mounted using the accessories provided.
Battery
Before using the device for the first time, you must fully charge the battery.
• Charging the Battery
1. Connect the camera to a computer or USB power supply (5V/2A).
2. The charging status light turns on while the battery is charging.
3. The charging status light turns off when the battery is fully charged.
• Changing the Battery
1. Press down on battery cover to open.
2. lnsert the battery so the contacts line up with those of the camera.
Getting Started
• Turn On: Press and hold the Power/WiFi Button for 3 seconds. When the camera is turned on, the
Operation Indicator turns on.
• Turn Off: Press and hold the Power/WiFi Button for 3 seconds.

Rollei Actioncam 8s Plus Specifications

General

Video resolutions	1280 x 720, 1920 x 1080, 2704 x 1520, 3840 x 2160 pixels
Maximum frame rate	- fps
Supported video modes	720p, 1080p
Video formats supported	MOV
Maximum video resolution	- pixels
Photo mode	Yes
Sensor type	-
Total megapixels	20 MP
Image formats supported	JPG
Flip-out screen	No
Product color	Black
Battery capacity	1000 mAh
Battery life (max)	1.41 h
Storage media	Memory card
Compatible memory cards	MicroSD (TransFlash), SDHC
Maximum memory card size	64 GB
Cables included	USB
Underwater case waterproof up to	40 m
Minimum focusing distance	2.75 mm

Weight and Dimensions

Width	- mm
Weight	- g