8. System requirement
Operating system
Windows XP / Vista / Win7 or above
Mac 9.x or X.x
CPU Pentium III or above
RAM At least 64 MB
Interface USB port
CD 4x speed CD ROM or above
9. Troubleshooting
Problem Cause Solution
Cannot turn on the camera
Low battery power.
Batteries placed at wrong
polarities.
Replace or install the batteries
correctly.
Photos can not be saved
when taking pictures.
The memory card has not
been formatted properly.
Format the memory in setup mode
of the camera. Please refer to
section 5.3.
Cannot find removable disk
after connecting the camera
to the computer
.
Connection failure. Make sure all cable connections
are secured and restart the
computer if necessary.
Flash does not work. Battery power is too low. Replace with 2 new AAA alkaline
batteries.
The batteries used up very
fast.
Incorrect or old, used up,
battery
Replace with 2 new AAA alkaline
batteries.
The photos are blurry 1. The camera is not held
steadily
2. The lens of camera is dirty.
1. Hold the camera steadily until it
beeps when taking
video/photo.
2. Clean the lens with soft dry
cloth.
To Next Page
Loading...
