How to fix a Rollei compactline 800 Digital Camera that won't turn on?
- DDeborah RussoAug 18, 2025
If your Rollei Digital Camera isn't turning on, the batteries may be exhausted. Try charging or replacing the batteries.
How to fix a Rollei compactline 800 Digital Camera that won't turn on?
If your Rollei Digital Camera isn't turning on, the batteries may be exhausted. Try charging or replacing the batteries.
What to do if my Rollei Digital Camera LCD displays "Memory full"?
If the LCD monitor of your Rollei Digital Camera displays "Memory full", it means the memory card is full. You should replace the memory card with a new one or delete unnecessary images.
Why does my Rollei compactline 800 Digital Camera turn off automatically?
Your Rollei Digital Camera might be turning off automatically because either the Power Saving feature has activated (turn power back on) or the battery is exhausted (charge the battery).
What does 'Card locked' mean on my Rollei compactline 800?
If your Rollei Digital Camera LCD monitor displays 'Card locked', it means the memory card is protected. Remove the card and slide the write-protect switch to its unlock position.
What to do if Rollei Digital Camera displays "Copy error"?
If the LCD monitor displays 'Copy error' on your Rollei Digital Camera, it could be due to two reasons: either the memory card is protected, or the memory card is full. If the card is protected, remove it and slide the write-protect switch to its unlock position. If the card is full, replace it or delete unnecessary files.
Why does my Rollei compactline 800 turn off after showing an empty battery icon?
If your Rollei Digital Camera displays an empty battery icon and then turns off, the batteries are exhausted. Please replace or recharge them.
What does 'Card error' mean on Rollei Digital Camera?
If your Rollei Digital Camera LCD monitor displays 'Card error', the memory card format may not be supported by the camera. Please go to the Setup menu to format the card.
Why no image displays on the TV screen from my Rollei Digital Camera?
If no image is displayed on the TV screen from your Rollei Digital Camera, it means that an incorrect TV-out type was selected. Set the correct TV-out type to match your TV system.
How to fix a stuck lens on my Rollei compactline 800 Digital Camera?
If the lens on your Rollei Digital Camera is stuck, the type of battery used may be incorrect, or the battery power level is too low. Try changing or charging the battery before using the camera.
What if my Rollei compactline 800 displays "Memory card is damaged"?
If the LCD monitor of your Rollei Digital Camera displays 'Memory card is damaged', the card itself may be damaged. You can either change the card or wipe it clean at the connected points.
Image Sensor | CCD |
---|---|
Megapixels | 8.0 MP |
Optical Zoom | 3x |
Digital Zoom | 4x |
Storage Media | SD/SDHC card |
Screen Size | 2.4 inches |
Video Resolution | 640 x 480 |
ISO Sensitivity | Auto, 100, 200, 400, 800, 1600 |
Guidelines for safe camera and battery usage, care, and charging.
Identification of camera exterior parts and buttons.
How to use navigation controls and key buttons for operation.
Step-by-step guide for inserting battery and memory cards.
Instructions for charging the battery and turning the camera on/off.
Explanation of icons and information shown on LCD in Photo Mode.
Explanation of LCD displays for Movie and Playback modes.
Guide to capturing photos and operating the zoom function.
Using AE/AF Lock, Flash modes, and selecting focus modes.
How to use different continuous shooting options like Burst and Speedy.
Adjusting exposure compensation and ISO sensitivity.
Settings for metering, AF area, tracking, and exposure/focus lock.
How to set and use the camera's self-timer.
Configuring movie recording settings and using prerecord.
Steps to delete various types of recorded media.
Procedures for batch deletion of files.
Guide to choosing appropriate scene modes for optimal shots.
How to navigate and use the camera's Record Menu.
Configuring white balance for accurate color reproduction.
Setting ISO sensitivity and maximum auto ISO.
Selecting metering modes for exposure calculation.
Using exposure bracketing and locking exposure/focus.
Controlling digital zoom and its effect on image quality.
Using grid lines for composition and enabling image stabilizer.