Rollplay FLEX KART - User Manual

Other manuals for Rollplay FLEX KART

Manual28 pages

Questions and Answers

D
Donna SmallJul 28, 2025
How to fix a Rollplay Sports & Outdoors vehicle that does not run?
- J
  Jessica HallJul 28, 2025
  If your Rollplay Sports & Outdoors vehicle isn't running, there are several potential causes: * The battery might be low; try recharging it. * The thermal fuse may have tripped; try resetting it. * Check for loose wires or connectors, ensuring they are securely attached. If the wires are loose, it is recommended to contact Customer Service. * The battery might be dead, or the electrical system or motor could be damaged. In any of these cases, contact Customer Service.
R
rosstylerAug 1, 2025
What to do if my Rollplay Sports & Outdoors vehicle battery will not recharge?
- S
  sandovalpaulaAug 1, 2025
  If your Rollplay Sports & Outdoors vehicle battery isn't recharging, make sure the charger is plugged into a functioning wall outlet. Also, check that the connectors are securely plugged into each other. If the charger still isn't working, call Customer Service for a replacement.
R
Rhonda Baker DDSAug 5, 2025
Why does my Rollplay Sports & Outdoors vehicle only run for a short time?
- E
  Erika StanleyAug 5, 2025
  If your Rollplay Sports & Outdoors vehicle runs for only a short time, it could be due to several reasons. The battery might be undercharged, so ensure a secure connection while recharging it for at least 8-12 hours. Overcharging can also be a problem, so never charge the battery for more than 30 hours. Finally, the battery might simply be old and need replacement.
M
Michelle HallAug 9, 2025
How to fix a Rollplay Sports & Outdoors vehicle that runs slowly?
- P
  Paul RobinsonAug 9, 2025
  If your Rollplay Sports & Outdoors vehicle is running slowly, it might be due to a few reasons. First, ensure the battery is fully charged by making sure there is a secure connection during recharging. The battery could also be old; contact Customer Service to order a replacement battery. Additionally, too much weight on the vehicle or harsh conditions can cause it to run slowly. Reduce the weight to no more than 25kg/55 lb and operate the vehicle on level ground and safe surfaces.
S
Shannon ChristianAug 13, 2025
What to do if my Rollplay Sports & Outdoors vehicle needs a push to start?
- B
  bradyannAug 13, 2025
  If your Rollplay Sports & Outdoors vehicle needs a push to start, check for loose wires or connectors and ensure they are securely attached. If the wires are loose, contact Customer Service. It could also be a “dead spot” on the motor, meaning electricity isn't being delivered to the terminal, in which case you should contact Customer Service.
A
Amber WilliamsAug 18, 2025
Why does the motor or gearbox of my Rollplay Sports & Outdoors vehicle make grinding noises?
- C
  Christine StephensAug 18, 2025
  If the motor or gearbox of your Rollplay Sports & Outdoors vehicle is making grinding noises, it could be due to motor or gear damage. Contact Customer Service for assistance.
M
Michael GreenAug 22, 2025
What to do if I cannot stop the Rollplay Sports & Outdoors vehicle?
- M
  mshawAug 22, 2025
  If you cannot stop the Rollplay Sports & Outdoors vehicle, it could be due to a damaged electronic component. Contact Customer Service for assistance.

Summary

Initial Battery Charging Procedure

Safety Guidelines

Safe Riding Rules

Essential guidelines for safe operation and user conduct.

Battery Safety Precautions

Precautions for handling battery posts, terminals, and leakage risks.

Adult Supervision Requirements

Mandatory guidelines for adult supervision during vehicle use.

Assembly and Setup Guide

Unfolding the Frame

Procedure for releasing the frame lock and unfolding the vehicle.

Steering Wheel Installation

Steps to connect wires and attach the steering wheel to the steering bar.

Seat Attachment Instructions

Instructions for securing the seat to the vehicle body using screws.

Maintenance and Care

Battery and Charger Management

Important details about battery charging, handling, and charger safety.

General Vehicle Care and Cleaning

Guidelines for regular inspection, cleaning, and storage of the vehicle.

Support and Warranty

Service and Repair Procedures

Contact information and procedures for service, repairs, or replacement parts.

Limited Warranty Details

Details of the product warranty, coverage, and claim process.

Summary

Initial Battery Charging Procedure

Safety Guidelines

Safe Riding Rules

Essential guidelines for safe operation and user conduct.

Battery Safety Precautions

Precautions for handling battery posts, terminals, and leakage risks.

Adult Supervision Requirements

Mandatory guidelines for adult supervision during vehicle use.

Assembly and Setup Guide

Unfolding the Frame

Procedure for releasing the frame lock and unfolding the vehicle.

Steering Wheel Installation

Steps to connect wires and attach the steering wheel to the steering bar.

Seat Attachment Instructions

Instructions for securing the seat to the vehicle body using screws.

Maintenance and Care

Battery and Charger Management

Important details about battery charging, handling, and charger safety.

General Vehicle Care and Cleaning

Guidelines for regular inspection, cleaning, and storage of the vehicle.

Support and Warranty

Service and Repair Procedures

Contact information and procedures for service, repairs, or replacement parts.

Limited Warranty Details

Details of the product warranty, coverage, and claim process.

The Rollplay Flex Kart is a ride-on vehicle designed for young children, offering a fun and engaging driving experience. This manual provides comprehensive instructions for assembly, operation, and maintenance, ensuring safe and proper use of the vehicle.

Function Description

The Rollplay Flex Kart is a battery-powered ride-on toy that allows children aged 2-5 years to drive and steer. It features a steering wheel with a power button for control, enabling forward motion and left/right steering. The vehicle is designed with a foldable frame, making it convenient for storage and transport. The 6V battery provides power for the motor, allowing the kart to reach a maximum speed of 3.2 km/h (2 MPH). The seat is adjustable, offering two length options to accommodate a child's growth.

Usage Features

Initial Battery Charge: Before the first use, the battery must be charged for a full 24 hours (and no more than 30 hours). This is crucial for optimal battery life and performance.
Regular Charging: After each use, the battery should be charged for 8-12 hours, but not exceeding 20 hours. Even if the vehicle is not in use, the battery should be charged at least once a month to prevent it from being in a discharged condition.
Battery Connection: To charge, ensure the Flex Kart is stopped and turned off. Locate the cover at the rear of the car, turn the cover lock to the unlocked position, and remove it. Unplug the red battery connector from the red engine connector. Connect the red battery connector to the red battery charger connector and plug the charger into a 240V AC outlet. To reconnect, unplug the charger from the outlet, unplug the battery connector from the charger, and then reconnect the battery connector to the engine connector. Replace the seat and lock it in place. It is not necessary to remove the battery for charging unless the outlet is inaccessible.
Unfolding the Frame: To unfold the vehicle, first release the Frame Lock by pulling it outward. While holding the Frame Lock in the released position, pull upwards on the Steering Bar towards the front of the vehicle until it clicks into place. Then, release the Frame Lock. If the Frame Lock is difficult to release, press down on the steering bar and try again.
Installing the Steering Wheel: Remove the screw from the steering wheel. Plug the steering wheel wire into the steering bar wire, ensuring the wires are gently tucked completely into the steering bar to prevent damage. Place the steering wheel onto the top of the steering bar, aligning the screw holes. Insert the screw into the hole and fasten with the nut to secure it.
Attaching the Seat: Remove the screws from the seat's polybag. Align the two holes on the seat over the holes on the vehicle body to the desired position. Insert the screws through the holes on the seat and the frame, then tighten with a Phillips head screwdriver. The seat has two length options; it is recommended to move the seat back to the second position as the child grows.
Operating the Vehicle: Turn on the power switch. To control the vehicle, press and hold the Start Button on the right of the Steering Wheel handle. This button controls both left/right steering and forward motion. The child should not release the button while riding.
Folding the Frame: Only adults should fold and unfold the vehicle to prevent potential injury. To fold, press and hold the Lock Button while simultaneously pinching the two Spring Tabs. Fold the Steering Bar down and slide the Frame Bracket towards the seat. Ensure the Frame Lock securely locks the vehicle in the folded position.

Maintenance Features

Regular Inspection: Regularly inspect all vehicle parts, including the charger, cord, plug, and other related components, to ensure they are in good working condition and free from damage.
Damaged Parts: If any parts are damaged, remove them immediately and contact Customer Service for replacements. Do not operate the vehicle if any parts are damaged.
Cleaning: Clean the vehicle carefully with a damp cloth and mild soap. Avoid getting water in or near any electrical parts. Do not wash the vehicle with a hose.
Storage: Store the vehicle indoors or cover it with a tarp. Keep it away from stoves, heaters, or other sources of heat.
Battery Care:
- Always handle the battery and charger by an adult who has read and understood the safety warnings.
- Never leave the battery in a discharged state.
- Keep the charger away from water or excessive moisture to prevent short-circuiting.
- Only use the charger specified with the original item. Do not charge the battery with any other charger or attempt to recharge non-rechargeable batteries.
- Do not replace the battery with any other type, as this will void the warranty.
- Remove damaged batteries immediately and dispose of them responsibly.
- Do not short-circuit the supply terminals.
- Disconnect the battery connector from the engine connector when the vehicle is not in use for extended periods to prevent battery drain.
Thermal Fuse: The vehicle is equipped with a thermal fuse to protect the electric circuit. If the vehicle stops unexpectedly, turn it off and on again to reset the fuse.
Troubleshooting: The manual includes a troubleshooting guide to help diagnose and resolve common issues such as the vehicle not running, running for a short time, running slowly, needing a push to start, not stopping, making grinding noises, or the battery not recharging. Solutions often involve checking battery charge, connections, or contacting Customer Service for replacement parts.
FCC Information: The device complies with FCC Rules, ensuring it does not cause harmful interference and accepts any received interference. Users are advised to reorient or relocate the receiving antenna, increase distance from the receiver, consult a technician, or connect the equipment to a different circuit if interference occurs. Any unauthorized changes or modifications could void the user's authority to operate the equipment.
Warranty: The product comes with a one-year limited warranty covering defects in materials and workmanship for the vehicle (excluding the 6-volt battery) for 12 months from the purchase date. This warranty is valid if the product is assembled and used according to instructions and is in addition to Australian Consumer Law rights. Hunter Products offers refunds or replacement parts for defects within the warranty period and covers reasonable expenses for warranty claims. The warranty does not cover defects from accidents, misuse, abuse, neglect, or unauthorized service. Customers are advised to retain their receipt as proof of purchase for warranty claims.