Rollplay W441 - Steering Wheel Installation; Connecting Steering Wheel

12
Attach the Steering Wheel
1. Locate the steering wheel screw and nut from blister box.
2. Plug the steering wheel connector (F) into the dashboard connector (E).
3. Carefully slide wires into dashboard to avoid damage. Insert the steering
wheel onto the steering rod, and align the holes on the wheel with the
holes on the rod. If you are having trouble aligning the holes, check to
make sure the steering rod is all the way up.
4. Insert the screw into the hole and fasten the nut to secure.
FE