'O
C:
<ll
CJ
C:
UJ
C:
@
31
000 miles
(50
000
km.)
or
21/2
years
service whichever
is
the earlier
Essential Maintenance
Engine
Change the engine
oil.
Fit
a new
oil
filter.
Battery
Check the level of the
electrolyte
and
if
necessary,
top-up with dis ti
11ed
water.
Belt tension
Check the tension of
all
driving
belts,
reset if
necessary.
Brakes
Inspect the footbrake
and
parking brake pad
Ii
nings;
fit
new
linings
if
necessary.
When
changing the
footbrake pads examine the
condition
of
the dust
excluders
on
the
calipers;
renew
if
necessary.
Manually
adjust
the parking brake pads.
Inspect
all
brake pipes and connections; the
Dealer
should report any defects to the Owner.
Fluid levels
Check
all
fluid
levels
and
correct as necessary.
Preventive Maintenance
Carburetters
Top-up the
oil
level in the
air
valve dampers.
Control I inkages
Apply
a few drops
of
engine oi I to the
accelerator
linkage
and to the gear range
selector
controls
adjacent to the transmission
casing.
Electrical system
Check al I
interior
lamps,
exterior
I amps,
instruments, warning lamps and
devices
for correct
operation;
rectify
if
necessary.
Parking brake linkage
Lubricate
the
pivot
pins
and
pulleys
in the parking
brake system
with
approved grease.
Tyres
Check the tread depth of
al
I tyres,
inspect
al I tyres
for
signs
of
damage. Check the
tyre
pressures when
they are
cold
and
adjust
if
necessary.
Note
Include the spare tyre.
Test
Road
test
the car for satisfc1ctory performance.
37 500 miles
(60
000 km.) or 3 years service
whichever
is
the earlier
Essential Maintenance
Air injection
pump
Check the
belt
tension and reset
if
necessary.
Air silencer
Fit
a new
air
filter
element.
Carburetters
Top-up the
oil
level in the
air
valve dampers. Check
the
float
chamber depression
and
rectify
if
necessary. Check the
idle
speed and
rectify
if
necessary. Check the choke
fast-idle
speed and
rectify
if
necessary.
Crankcase emission control system
Clean the gauze flame traps in the crankcase
breather tube, Clean the adapter in the choke
butterfly
housing.
Engine
Change the engine
oil.
Fit
a new
oil
filter.
Exhaust manifolds
Check the torque
tightness
of
the exhaust manifold
bolts.
Fuel evaporative emission control system
Check the condi
lion
of
the
pipes
and connections;
rectify
if
necessary.
Ignition system
Fit
new sparking
plugs
ensuring that the gaps are
correctly
set.
Lubricate
the
distributor
spindle
(shaft bearings) and automatic advance mechanism
with
engine oi I. Check the
ignition
timing and
reset
if
necessary. Check the engine
idle
speed and
rectify
if
necessary.
Battery
Check the level of the
electrolyte
and
if
necessary,
top-up
with
disti
I led water.
Belt tension
Check the tension
of
all
driving
belts
and reset
if
necessary.
Brakes
Inspect the footbrake and parking brake pad
linings;
fit
new
linings
if
necessary.
When
changing the
footbrake pads examine the
conditi~n
of
the dust
excluders
on
the
calipers;
renew
if
necessary.
Manual I y
adjust
the parking brake pads.
Inspect al 1 brake
pipes
and connections; the
Dealer
should report any
defects
to the Owner.
Fluid
levels
Check
all
fluid
levels
and correct as necessary.
Front suspension
Inspect the front suspension ball
joint
rubber
covers,
if the covers are found to
be
damaged,
fit
new
joints
and covers.
Steering ball joints
Lubricate
the four grease
nipples.
Inspect the rubber covers on the bal I
joints,
if
the covers are found to be damaged, the
joints
should
be
dismantled and new
parts
fitted
if
necessary.
E25 • 7
To Next Page
Loading...
