24
– Keep the power cable away from heat and humidity.
– If the power cable is damaged, it must be replaced by the
manufacturer, its After-sales Service or equally qualified people.
– If the power cable is damaged, do not use the machine.
– If an electrical extension lead is necessary, only use an earthed
cable, whose conductor has a cross-section of at least 1.5 mm.
– To prevent dangerous damage, never place the machine on or
next to hot surfaces such as radiators, cookers, ovens, gas stoves,
naked flames or similar heat sources.
– Always place it on a horizontal surface which is stable and even.
The surface must be resistant to heat and fluids such as: water,
coffee, limescale remover, etc.
– Unplug the machine from the power socket when it is not going
to be used for a prolonged period.
– Unplug the machine by pulling from the plug rather than the
power cable so that you do not damage it.
– Before cleaning and maintaining your machine, unplug it from
the power socket and let it cool down.
– Never touch the power cable with wet hands.
– Do not immerse the machine, either as a whole or in part, in water
or any other liquids.
– Never place the machine or any part of it in a dishwasher.
– Together, electricity and water are dangerous and may cause fatal
electric shocks.
To Next Page
Loading...
