y
x
y
x
x
x
FB
top rail
FB middle
panel
STEP B
Take the footboard of your crib and carefully hold it in vertical position, with its feet on
the floor.
Using the supplied Allen wrench (1) completely unscrew all four Allen bolts and
washers (x) (previously mounted in factory) then remove the top rail.
You will find another factory mounted Allen bolts and washers (y), one for each leg of
your footboard. Remove two smaller Allen bolts (y) and then the footboard middle
panel resulted by pulling it upward (see FIGURE B). Please, store the top rail, the
middle panel and the Allen bolts resulted in a proper place, taking care not to scratch
the wood finish.
FIGURE B
REQUIRED
To Next Page
Loading...
