6. Snoezelen® Stimulations
Sight
7. Best Use
Use with fibre optics, Starcloths and Milky Way Carpets in a darkened environment.
8. Compatible ROMPA® Products
17903 etc – Super Safe Plastic Fibre Optics
20473 etc – Jumbo ‘Bamboo’ Fibre Optics
21748 – Shimmering Curtain
17557 etc – Ultra Violet Fibre Optics
17051, 17052 – Starcloths
11726, 14726 – Milky Way Carpet
Wi Fi controllers (see below)
9. Starting Up
Slide the boss of your fibre optics, Starcloth or Milky Way Carpet into the circular
hole in the front face of the light source.
Tighten the screw on the top of the unit to secure the fibre optics into the unit.
Connect the power lead.
Using the ON/OFF switch at the back of the light source, switch the light source on.
10. Detailed Description
With LED technology, this Wi Fi light source is cool-running and maintenance-free.
Compatible with an interactive device such as Colour Changing Panel, Wi Fi Microphone,
Talking Cubes or 8 Colour Wirefree Controller. Ideal for sensory stimulation, colour
recognition, and developing the understanding of cause and effect. Compact and can be
wall-mounted.
11. Safety
Always supervise the use of this product, especially with fibre optics.
Install the light source out of reach of clients.
The light source is to be used in dry environments. Allow unrestricted airflow around
the light source. The ambient temperature should not exceed 40ºC.
Do not allow clients to pull on the fibre optics.
Should you need to remove the fibre optics, remove the boss with care – release the
screw – do not just pull these out with force.
To Next Page
Loading...