CORDLESS SPRAY GUN
8
BRUSHLESS
.CONNECT GUN BODY WITH MOTOR
a) Hold the gun with your hand to align the slot on the gun with the
slot on the motor and insert it .
b) Hold the motor handle with your hand, rotate the right hand
clockwise 90°.
c) When the gun and host are parallel, it is locked
.REMOVE THE MOTOR
a. Hold the gun with your hand and press the latch in the direction
of the arrow.
b) At the same time hold the motor handle with your hand and
rotate it counterclockwise 90°.
c) Pull out to remove the motor from the gun.
To Next Page
Loading...