- 01 -
Replace all hardware on bed components
except for the bed stops.Familiarize yourself
with all components in Figure 1. Position
PARTS in front of desired cabinet location.
Tools needed: Power Drill, Stud Finder, Tape Measure, Phillips-head Screwdriver, Flat-Head
Screwdriver, #4 Allen Wrench, Clamps and Drill bits appropriate for your mounting surface see
step 16 on page 9.
Step 1:
Header
Headerboard
Assembled
Frame & Face Panel
Cabinet
Vertical
Cabinet
Vertical
To Next Page
Loading...
