RoomTec Murphy Bed Accessories - Page 4

- 03 -
Lay assembled FRAME and
FACE PANEL face-down on
a padded surface i.e.,blanket
or rug.
Step 3:
Lay cabinet verticals on
finished (front) edge as
shown.
Step 4:
Slide plastic spacers onto pivot bars.
Step 5:
Slide pivot bars into pivot
holes in bed frame until no
gap remains between bed
frame and verticals.
Step 6:
Assembled
Frame & Face Panel
Assembled
Frame & Face Panel
Cabinet
Vertical
Cabinet
Vertical
Cabinet
Vertical
Cabinet
Vertical