RoomTec Murphy Bed Building Queen Vertical - Introduction and Preparation; Tools Needed:; Important Safety Warning

Warning!This bed contains stored mechanical energy
,which can cause serious injury if improperly handled.
Your bed must be securely anchored to the wall! Read
instrucons and watch the video thoroughly before
assembly and disassembly!
- 01 -
Tools Needed:
Power Drill
Drill Bits: 1/8",1/4", 5/16",1" Forstner Bit, 5/8" Forstner Bit
Power Saw, Table Saw or Circular Saw
Jigsaw or Coping Saw
1
2
3
4
5
6
7
8
9
10
11
Tape Measure
#4 Allen Wrench
Hammer
Clamps
Straight Edge or Framing Square
Household Iron for Veneer Tape and Utility Knife
Stud Finder
Phillips-Head and Flat-Head Screwdrivers or
Driver Bits for Drill
PLEASE INSPECT YOUR BOX CONTENTS
TO ENSURE YOU HAVE RECEIVED
ALL COMPONENTS.
Online Video:
bit.ly/deluxevercalvideo