ROOTS Jet E 130 - Introduction

5
Jet E 130 / 170
INTRODUCTION
PREFACE
Dear Customer,
We are pleased with your having chosen the JET E 130/170
machine for your cleaning requirements. Backed by our industry
expertise that spans across two decades, we assure you that the
machine comes with our Roots promise of quality, efficiency and
performance.
We advise you to carefully read through the instructions prior to
the operation of the machine. This manual contains detailed
instructions for the proper operation of the machine, along with
important information regarding its handling, care maintenance
and service needs.
We are sure that you will find the machine and its performance to
your utmost satisfaction. Once again, we thank you for choosing
Roots Multiclean Ltd (RMCL) as a trusted partner for your
cleaning requirements and solutions.
Usage, Handling & Modification
This machine has been exclusively designed for cleaning of
vehicles, machines, factories, masonry etc, to remove stubborn
dirt using pressurized water. Use of the product beyond the
specified scope of functioning is deemed improper and the
manufacturer cannot be held liable for any damages which may
arise due to this.
This machine may be used only by persons who are trained or are
familiar with the machine and are aware of the possible hazards
involved. The appropriate Accident Prevention Regulations as
well as applicable general regulations pertaining to Safety and
Health at the work place must be adhered to by the user.
Modifications made to machine without the manufacturer's
consent will relieve the manufacturer of responsibility and any
possible liability for consequential damage
Notes On Domestic Warranty
Please refer to the Limited Warranty card supplied
along with the m achine fo r a d d ition a l
information. This Warranty Policy is applicable only for the
product sold within India. If the product requires repair or
maintenance work to be performed, please ensure that you get
the machine serviced from an authorised service centre or dealer
of RMCL to ensure that the warranty is not void.
Acceptance of the Machine
On arrival of the machine at the shipping address, please check
for any damage that may have occurred as a result of transit. In
the event of any such damage, the purchaser is bound by
responsibility to send a claim letter to the concerned RMCL
branch/dealer with a copy of the invoice. The letter should be
sent within 24 hours of receipt of the machine.