ROOTS RootsScrub E4550 ES - Raising;Lowering of Brush Head

19
RootsScrub E4550 ES
e. Pull out the brushes.
a. Move the machine towards the escalator.
b. Tip the machine downwards and engage the
parking brake.
To raise/lower the brush head, follow the steps below:
The machine will now rest on its operating position.
Raising/Lowering of Brush Head
Escalator step
Landing plaorm
Comb plate
Ensure sufficient care is taken when lowering the machine in
position, might tip faster due to self weight.
è Ensure that the motion of the escalator is directed towards
the machine.
THE RECOMMENDED POSITION OF THE MACHINE TO OPERATE
IS AT THE LOWER LEVEL OF THE ESCALATOR.
CAUTION
WARNING
Brushes set on the escalator step
Posion machine at
this point (before comb plate)
Lower level
Upper level
MACHINE OPERATION