Roper Rhodes Minerva Toilet Seat User Manual

Toilet Seat Fitting Instructions & Product Care
Toilet seat
Hinge components
Please read carefully before attempting to fit the seat. If you are not the end user,
please make sure the aftercare instructions are made available for the end user to
read.
Stainless steel cover cap
Screw
Adjustment plate
Hinge anchor
Rubber washer
Fixing bolt
Quick release
button
Hinge socket
1. Fixing the hinge anchor:
Insert the Adjustment plate and Rubber washer into their
positions on the Hinge anchor component.
Place the Screw through the components and into the hole
on the toilet pan.
Screw the fixing bolt onto the Screw from the underside of
the toilet pan.
Use a screwdriver to tighten from the top. NOTE: don't fully
tighten at this stage as some adjustment may be required.
Pin

Roper Rhodes Minerva Toilet Seat Specifications

General

Type	Toilet Seat
Material	Thermoset Plastic
Color	White
Hinge Type	Soft Close
Compatibility	Standard Toilets

Summary

Toilet Seat Fitting

Fixing the hinge anchor

Insert adjustment plate and rubber washer into hinge anchor, then secure with screw and fixing bolt from toilet pan underside.

Fitting the seat

Align hinge anchor pins with seat sockets, insert pins firmly, and check seat alignment before final tightening.

Hinge Adjustment

Adjust pin position by rotating hinge anchor or sliding screw for precise seat alignment.

Quick release mechanism

Seat is removable for cleaning; press inner hinge buttons to detach.

Aftercare Instructions

Cleaning and Maintenance

Clean weekly with a soft damp cloth and mild soap. Avoid harsh cleaners and scrubbing.

Replacement Parts

Replacement hinges, fixings, and washers can be obtained directly from Roper Rhodes Ltd.

Safety Warning

WARNING: Do not stand on the toilet seat lid or ring.