STORM BAR SHOWER VALVE
SV2208
STORM BAR SHOWER VALVE
SV2207
TMV2 / Buildcert Ref No: RRTAV10
TMV2 / Buildcert Ref No: RRTAV9
REF: KH.RR.BSV10 | 07.10 V3.00
FACTOR BAR SHOWER VA
LVE
SV1308
FACTOR BAR SHOWER VALVE
SV1307
TMV2 / Buildcert Ref No: RRTAV8
TMV2 / Buildcert Ref No: RRTAV11
Customer Services, Roper Rhodes Ltd, Brassmill Lane Trading Estate, Bath, BA1 3JF
TEL: 01225 303 900 | FAX: 01225 448 877
Email: sales@roperrhodes.co.uk | Web: www.roperrhodes.co.uk
STORM & FACTOR
THERMOSTATIC SHOWER BAR VALVE
THERMOSTATIC SHOWER BAR VALVE
Installation & aftercare instructions
Please retain for future reference
SERVICE INTERVALS
Subsequent frequency can be determined with reference to previous test results. Where no significant deviation was
recorded the test interval can be made equal to the maximum recorded interval to that point.
Note. Check valve and strainer servicing must be conducted at each test interval.
If the recorded mixed water temperature is greater than > 2°K from the initial recorded settings or the set point cannot
be reached / stabilised further action is required.
It is important to establish that the incoming water supplies still satisfy the initial guidance and also that no additional
draw off variation that could affect performance has occurred.
The material selection for this valve has excellent resistance to scale build up and is designed such that there are no
serviceable parts beyond items 1 & 2 as described previously.
In the very unlikely event that initial performance cannot be achieved, and all external parameters are correct, the unit
may require replacement.
10-YEAR GUARANTEE
We have complete confidence in this Roper Rhodes product and as such it is offered with a 10-year guarantee against
defects in manufacture. The guarantee requires that this product be used in the manner for which it was intended and
that it is installed & maintained in accordance with the fitting instructions and local water bylaws. The guarantee
covers products in domestic use only.
The guarantee is invalidated should the valve be damaged by water borne debris. Make sure that supply pipes are clear
of any debris prior to installation, this is particularly important on new plumbing installations.
In the unlikely event that this product should fail during the guarantee period we will either replace the faulty part or the
complete unit as appropriate.
To Next Page
Need help?
General
