DUAL-VISION
TM
XC4
DV440
QUICK START INSTALLATION GUIDE
SCAN ME FOR DVXC4 INSTALLATION
GUIDE ON ROSCO CLOUD WIKI*
WE’RE HERE TO HELP
IF YOU HAVE ANY VEHICLE-RELATED OR TECHNICAL
QUESTIONS, PLEASE FEEL FREE TO REACH OUT TO US
VIS THE METHODS BELOW.
EMAIL US: TECHSUPPORT@ROSCOVISION.COM
CALL US: 718.526.2601
VISIT OUR WEBSITE: WWW.ROSCOVISION.COM
90-21 144TH PLACE
JAMAICA, NY 11435
LIT P/N: MNLDV440QSG
VERSION 1.0
12/17/2018
never bend the antenna cable
Always loosely coil up extra antenna
cable. Never bend or pinch the antenna
cable. When routing antenna cables
around the dash do not force the cable
between the panels. Check for pinch
points or sharp brackets behind the dash
that may rip or damage the cable.
antenna mounting
When mounting the antenna, make sure
the FLAT side of the antenna has a clear
view of the sky. We recommend mounting
the antenna on the windshield.
SCAN ME FOR DVXC4 USER
MANUALS ON ROSCO CLOUD WIKI*
https://wiki.roscocloud.com/user:product:dual-vision_re-
cording:dual-vision_xc4:installation_guide:home
POST INSTALLATION CHECKLIST
⸋ Is the red wire connected to constant
power (ahead of kill switch if
applicable)?
⸋ Is the yellow wire connected to ignition
power?
⸋ Did you adjust the camera angle?
⸋ Are both lens protectors removed?
⸋ Are all components and cables secured
with zip ties?
⸋ Is the antenna mounted the correct
way?
https://wiki.roscocloud.com/us-
er:product:dual-vision_recording:du-
al-vision_xc4:user_manual
*Login required to access Rosco Wiki pages
*Login required to access Rosco Wiki pages
To Next Page
Need help?
General