Rosco Dual-Vision XC4 Installation Guide

Rosco Dual-Vision XC4

12 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Setra Coach Bus Installation Guide

Version 4.10.2

Proprietary and Confidential Setra Coach Bus

This guide will show the proper way to install a Dual-Vision XC4 Camera in a Setra Coach Bus. Please

review the Installation Guidelines for grounding and making connections prior to installing. In this guide

you will find dash removal, wire locations, & mounting locations.

Verify no vehicle service lights are on prior to installation. Contact a Fleet Manager immediately if the

vehicle has any damage

After testing and verifying power wires, disconnect the negative battery terminal to prevent any

accidental shorts or blown fuses

UPDATED October 15

th,

2018

***NEW PART***

***Harness DV457 is needed if trigger wires are being connected***

For Technical Support please contact our support team at:

Techsupport@Roscovision.com

Gray – Caution

Red – Warning

Blue – Extra Installation Parts Needed

Purple – New Installation

Table of Contents

Other manuals for Rosco Dual-Vision XC4

Installation & Operating Instructions40 pages

Quick Start Installation Guide2 pages

Questions and Answers:

G
George PerezAug 2, 2025
What to do if the event icon is constantly lit on my Rosco Camcorder?
- T
  todd38Aug 2, 2025
  If the event icon on your Rosco Camcorder is constantly lit, it is likely due to constant events and chimes triggered by bumps and potholes. To resolve this, increase the G-Sensor settings based on your vehicle type and specific needs.
A
Andrew JacksonAug 13, 2025
Why is the LCD display dark and no chime heard on my Rosco Dual-Vision XC4 Camcorder?
- W
  William BuckleyAug 13, 2025
  If the LCD display is dark and you don't hear a chime when starting your vehicle, it indicates that the Rosco Camcorder is not receiving power. Check the power cable connection and fuses to ensure they are properly connected and functional.
E
Emily ButlerAug 22, 2025
How to fix a faint LCD display on Rosco Dual-Vision XC4, but chime is heard?
- M
  Matthew MartinezAug 22, 2025
  If the LCD display on your Rosco Camcorder is faint, but you hear the chime upon starting the vehicle, the brightness setting is likely low. Open the Configuration screen in DV- Pro5 and adjust the Backlight Day/Night Settings to increase the display brightness.

Rosco Dual-Vision XC4 Specifications

General

Sensor Type	CMOS
Operating Temperature	0°C to 40°C
Lens Mount	N/A (Fixed Lens)
Lens Type	Fixed
ISO Sensitivity	Auto
White Balance	Auto
Exposure Compensation	+/- 2.0EV
Video Resolution	1920 x 1080 (Full HD)
Video Output	HDMI, USB
Audio Recording	Built-in microphone
Display Type	LCD
Storage Media	SD Card (up to 128GB)
Battery Type	Lithium-ion
Connectivity	HDMI, USB
Power	5V DC