A Century of Automotive Safety
13
Testing & Maintenance
How to Test:
1. Apply the parking brakes.
2. Turn Ignition on. (DO NOT TURN ON VEHICLE)
3. Shift into reverse gear.
4. Image should appear on the monitor.
Trouble Shooting:
Problem Solution
No power to monitor while reversing.
Check power and reverse
trigger connections.
"No Signal" appears while reversing.
1. Press AV1/AV2 button to
change video inputs.
2. Check video input
connections.
3. Check camera power
connections.
Video image is not sharp. Check camera lens for debris.
Maintenance:
Always keep camera clear from dirt, snow, and mud. Clean camera with
a soft moist cloth.
To Next Page
Loading...
