12
www.roscovision.com
Testing & Maintenance
How to Test:
1. Apply the parking brakes.
2. Turn Ignition on. (DO NOT TURN ON VEHICLE)
3. Shift into reverse gear.
4. Image should appear on the monitor.
Trouble Shooting:
Problem Solution
No power to monitor while reversing.
Check power and reverse
trigger connections.
"No Signal" appears while reversing.
1. Check video input
connections.
2. Check camera power
connections.
Video image is not sharp. Check camera lens for debris.
Maintenance:
Always keep camera clear from dirt, snow, and mud. Clean camera with
a soft moist cloth.
To Next Page
Loading...
