Note: Avoid using bent or damaged metal gobos as they may result in jam-
ming of the mechanism, which can lead to damage of the motor.
Glass Gobos
1) Remove gobo retaining spring from gobo gear.
2) Remove steel gobo stepper ring from gobo
gear and put aside. It is not used with glass
gobos.
3) Place glass gobo into gobo gear.
4) Replace gobo retaining plate in gobo gear.
INSTALLING GOBOS
Metal Gobos
1) Remove gobo retaining spring from gobo gear.
2) Remove steel gobo stepper ring from gobo gear.
3) Place metal gobo into gobo gear.
4) Replace steel gobo stepper ring in gobo gear.
5) Replace gobo retaining spring in gobo gear.
3
Metal gobo placed in Vortex 360.
To Next Page
Loading...