Note
The MON2020 version number is located on the back of the USB card.
2. Retain the shipping information.
3. Inspect all parts and assemblies for possible shipping damage.
4. If any parts or assemblies appear to have been damaged in shipment, first file a
claim with the carrier.
5. Next, complete a full report describing the nature and extent of the damage and
forward this report immediately to your Emerson Customer Care representative.
6. Include the GC's model number in the report.
Emerson will provide disposition instructions as soon as possible.
If you have any questions regarding the claim process, contact your Emerson
Customer Care representative for assistance.
Only proceed to install and start up the GC if all required materials are on hand and
free from obvious defects.
Getting started Quick Start Guide
July 2020 00825-0100-3770
10 Emerson.com/Rosemount
To Next Page
Loading...