2.2.3 Floor mount
If you specify Floor Mount in the sales order, Emerson sends the arrangement pre-
assembled with the gas chromatograph (GC).
The arrangement includes an additional support stand that is intended to be anchored to a
floor or an instrument pad. The base rails have holes that are 13.625 in. (346 mm) apart,
side to side, and 16.75 in. (425.5 mm) apart front to back. The holes are ½ in. (12.7 mm) in
diameter and will accept up to 7/16-in. (10 mm) bolts.
Figure 2-3: Floor Mount
Quick Start Guide Installation and start-up
00825-0100-3770 July 2020
Rosemount 700XA 17
To Next Page
Loading...