Rosewill RC-410LX User Manual

8-port Gigabit Desktop Switch RC-410LX User Manual
- 10 -
Appendix B: Troubleshooting
1. The Power LED is not lit
Check to see if the DC power cord is connected to the Switch properly, and make sure the power
source is ON.
2. The Link/Act LED is not lit when a device is connected to the corresponding port
Check to see if the cable connectors are firmly plugged into the Switch and the device, and verify the
connected device is turned on and working well. Make sure the cable is not longer than 100 meters
(328feet).
Thank you for purchasing a quality Rosewill Product.
Please register your product at: www.rosewill.com for complete warranty information and future
support for your product.
Support: techsupport@rosewill.com

Rosewill RC-410LX Specifications

General

Interface	Ethernet
Connectivity technology	Wired
Parallel ports quantity	0
Ethernet LAN (RJ-45) ports	1
Chipset	Realtec RTL8110SC
Internal	Yes
Certification	CE, FCC
Component for	PC
Product color	Silver
Connector(s)	RJ45
Wireless connection	No
Supported data transfer rates	10/20/100/200/1000/2000Mbit/s
LAN controller	Realtek RTL8110SC(L)
Cabling technology	10/100/1000BaseT(X)
Networking standards	IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1000 Mbit/s
Windows operating systems supported	Windows 2000, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 8, Windows 8 x64, Windows 98, Windows 98SE, Windows ME, Windows NT, Windows XP Home