SATA105G/ATA 133 RAID Controller Card RC215 User Manual
3
that all users turn off the power before you add any HD to PC.
5. If you want to use RC-215 without any RAID function, please do not
enter RAID BIOS and change the RAID setting. RAID function will only
be activate after you enter RAID BIOS and set a RAID set correctly.
Driver installation is the same for a RAID card whether you want to use
a RAID function or not. Never install a un-RAID version driver to a RAID
card even you want to use a RAID card without RAID function.
Bus Interface
PCI Bus 32 bit
Connectors
2 x internal SATA connectors
1 x PATA connector
Package Contents
1x PCI SATA + PATA Raid Card
1 x User Manual
1 x Driver CD
Note: Contents may vary depending on the market/country.
System Requirements
Pentium-class computer with one available PCI slot
Windows® 2000, XP/2003 32/64 bit, Vista 32/64 bit
Hardware Installation
Turn Off the power to your computer.
Unplug the power cord and remove your computer’s cover.
To Next Page
Loading...
Need help?
General