Need help?Do you have a question about the Rosewill RSV-Cage and is the answer not in the manual?
Instructions on how to remove the top cover from the chassis by unscrewing and sliding it off.
Steps for preparing the 3.5" module, installing HDDs into trays, and reassembling the module.
Guide to removing chassis modules and front panels to prepare for RSV-Cage installation.
Steps for inserting the RSV-Cage into the chassis ODD tray and aligning its rails.
Procedure to remove the installed HDD cage by pressing release buttons and sliding it out.
Instructions on how to remove the top cover from the chassis by unscrewing and sliding it off.
Steps for preparing the 3.5" module, installing HDDs into trays, and reassembling the module.
Guide to removing chassis modules and front panels to prepare for RSV-Cage installation.
Steps for inserting the RSV-Cage into the chassis ODD tray and aligning its rails.
Procedure to remove the installed HDD cage by pressing release buttons and sliding it out.
General| Material | Metal |
|---|---|
| Color | Black |
| Quantity | 1 |
| Cooling Fans | 1 x 80mm Fan |
| Power Supply | Not included |
| Form Factor | 5.25-inch |
| Compatibility | Standard 5.25-inch drive bays |
To Next Page
