PAGE 2
Rositek Technologies
www.rositek.com
© 2021 Rositek
All rights reserved
Email: support@rositek.com
USER GUIDE AND TROUBLESHOOTING -- RMP2
INTRODUCTION
READ BEFORE
OPERATING
MACHINERY
Thank you for purchasing this Rositek product.
Before using this device, please read these instructions and Safety
Precautions carefully.
After reading and familiarizing yourself with the device, store the manual in a
safe place for future references.
RMP2 is Rositek 2-ton manual heat press with a customized leverage system with an extra-long
handle. It’s portable, small, and effortless; Solid frame, non-rusting & non-breaking.
The following precautions are provided to prevent harm or injury to yourself and others.Please make
sure to thoroughly read, understand, and follow these precautions before using. After reading and
familiarizing yourself with the equipment, store the manual in a safe place for future references.
• Use this product only as described in this manual.
• Keep the equipment out of the reach of children at all times.
• Unplug the heat press from the electrical outlet and let it cool down
COMPLETELY before cleaning, performing maintenance, or repair.
• DO NOT operate the product after the appliance malfunctions or is dropped or
damaged in any way.
• Clean the plates with isopropyl alcohol and wipe them dry with a clean cloth.
Ensure both plates are completely dry before use.
• DO NOT leave any cords near a heat source.
• DO NOT handle a power plug or other components of the press with wet hands.
• DO NOT connect too many power plugs to the same power outlet.
• Remove dust around the plug and power cord with a clean dry cloth.
• DO NOT disassemble the press or make any modifications to the equipment
without professional instructions.
WARNING: Follow the warnings below.
SAFETY PRECAUTIONS
The units are intended for LEGAL use only, in accordance with your
federal, state, and local laws, ordinances, and regulations.
DISCLAIMER
To Next Page
Loading...