© 2017 CHARLES ROSS & SON COMPANY
16
PARTS LIST - CDA-10
Part # Item # Description Quantity
1 Bonnet 1
2 Motor, 3HP, 1800rpm, Anchor Blade 1
3 Pulley, 3.15 Dia, Driver, Anchor Blade 1
4 Bushing, 1-1/8", Driver, Anchor Blade 1
5 Belt, V, Anchor Blade 2*
6 Pulley, 4.75, Driven, Anchor Blade 1
7 Bushing, 3/4", Driven, Anchor Blade 1
8 Reducer, Ratio 15.32:1, 1-7/16" Bore, Anchor Blade 1
9 Pulley, 4.12", Driven, Disperser Blade 1
10 Bushing, 1-3/16", Driven, Disperser Blade 1
11 Belt, V, Disperser Blade 2*
12 Pulley, 6.5", Driver, Disperser Blade 1
13 Bushing, 1-1/8", Driver, Disperser Blade 1
14 Motor, 5HP, 3600rpm, Disperser Blade 1
15 Cover, C/S, Bonnet 1
16 Non-rotation rod 1
17 Hydraulic oil reservoir, 10gal 1
18 Control Valve, 3-way 1
19 Hydraulic Control Valve, Hand 1
20 Exhaust Muffler 1*
21 Hydraulic Cylinder, 5" Dia x 20" Stroke, 42" OAH 1
22 Wiper, Hydraulic Cylinder 1*
23 Packing Gland, Hydraulic Cylinder 1
24 Packing, Chevron, Hydraulic Cylinder 1*
25 Safety Limit Switch & Lever Arm, Mix Can 1
26 Locking Pin, Can Lock & Mix Can 2
27 Can Lock 1
28 Mix can, 10 gallon 1
28A Thermocouple Assembly, Flush mount, Type J (Optional) 1
29 Shaft, Disperser, SS 1
30 Disperser Blade, 3-1/2" Dia x 1/2" Bore, SS 1*
31 Screw, SS 1/2-13 x 1" 1
32 Lock Washer, SS, 1/2" 1
33 Shaft, Anchor, SS 1
34 Cap, Anchor Shaft, SS 1
35 Key, Anchor Shaft, SS, 1/4" x 1/4" x 1-3/4"L 1
36 Screw, 1/2-13 x 1-3/8 1
37 Anchor Blade, SS 1
37A Teflon Scrapers (Optional) 1 set
38 Cover, Vacuum, SS, 10 gallon 1
38A Thermoprobe, type "J" (Optional) 1
39 Disperser Tower Assembly Housing, CS 1
40 Safety Limit Switch & Roller Arm, Height 1
41 Anchor Tower Assembly Housing, CS 1
To Next Page
