CARING
FOR YOUR CONTAINER
CLEANING INSTRUCTIONS:
1.
Regularly wash all parts of the container in warm soapy water. Never use abrasive sponge or cloth.
2.
When disassembling the container, handle all parts gently. Please refrain from using too much force.
2.
3.
4.
Gently pull the handle from the front of the container.
5.
Reach into container and remove portion wheel by gently pulling upwards or turning container upside down.
HOW TO ASSE
MBLE:
1.
Place portion wheel into container, making sure the holes of the portion wheel align with the container’s holes.
2.
3.
4.
Insert handle through front of the container, making sure to push through portion wheel and through the back of
the container.
Fill container with desired dry product and place lid securely on the container.
Fo
llow Steps 5 thru 10 on Page 1.
•
Pro6-SM – 1 tablespoon
•
EZP005 – 1 tablespoon
•
EZP012 – 1 teaspoon
•
EZP013 – 2 teaspoons
•
EZP014 – 3 teaspoons
•
EZP015 – 4 teaspoons
The Rosseto interchangeable portion wheels deliver just the right
amount of product every time.
Test each wheel with your dry foods
to determine which works best for you!
HOW TO DISASSEMBLE:
3. Reassemble the unit only after all parts are completely dry.
Please contact customer support a
t (847)763-1215 and we’ll be
happy to assist with any assembly questions, comments or concerns.
ROSSETO
®
3600 W. Pratt Avenue. Lincolnwood, IL 60712
Visit our website at: www.rosseto.com
NEED ASSISTANCE?
RELATED ITEMS
Black Matte Table-Top Dispensers with Walnut Tray
Nickel Metallic Table-Top Dispensers with Bamboo Tray
•
EZ518:
1 pc 1.3-gallon container
•
EZ529: 1 pc 2-gallon container
•
EZ530: 1 pc 3.5-gallon container
•
EZ541: 2 pcs 3.5-gallon containers
Need a different-sized portion wheel? We have 6 more options for you to choose from!
•
EZ520: 3 pcs 1.3-gallon containers
•
EZ522: 5 pcs 1.3-gallon containers
•
EZ545: 1 pc 1.3-gallon container
•
EZ550: 1 pc 2-gallon container
•
EZ551: 1 pc 3.5-gallon container
•
EZ547: 3 pcs 1.3-gallon containers
1.
Gently lift your container by a couple of inches, stopping before the steel handle hits the metal. Angle the top of
the container towards you until the back end of the handle shaft is cleared through the opening. After this, you
may clear the rest of the container through the opening. Handle your container with care by making sure the
steel handle does not hit the metal!
Remove lid from top of container. Make sure there is no remaining product inside that can spill over.
Other portion wheels available:
Set your container on a secure flat surface.
2014 February 12 IS010 - V3
To Previous Page
Loading...
