1. Introduction
The ME-1515 is a lockable metal enclosure that houses the AC-825IP access control series and can be used to house
one AC-825IP unit or two x-805 expansions boards.
The ME-1515 enclosure has a Universal Power Socket (UPS) with a C14 standard plug for the VAC switcher power
supply, as well as an audio speaker sounder for chime, bell, and siren.
The ME-1515 has a VDC power management board with charger for a 12 V / 7 Ah lead acid battery, and output power
supply.
The unit has a LED illumination bar that is connected to the controller boards and lights when the enclosure door is
open. The illumination bar includes a tamper switch and a green power status LED at the front of the enclosure.
1.1. Related Documents
•
AC-825IP Hardware Installation and User Manual
•
AC-825IP PCBA DIN Rail Access Controller Manual
•
R/S/D/P-805 Series Installation Guide
2. Technical Specifications
Electrical Characteristics
Enclosure SMPS
Input: 100 to 240 VAC, 1.6 A, 50–60 Hz, switch mode power management board, C13
power cord
Output: 15 VDC, 4 A
PCBA Input Power
15 VDC, 2 A, regulated power management board
Backup Battery 12 V sealed lead acid (SLA) up to 7 Ah
Environmental Characteristics
Operating Environment Indoor
Operating Temp. Range 0°C to 40°C (32°F to 104°F)
Operating Humidity Range 0% to 85% (non-condensing)
Physical Characteristics
Dimensions (H x W x D) 404 x 346 x 101 mm (15.9 x 13.6 x 4.0 in.)
Weight
1
4.5 kg (159.3 oz)
1
1
For weight purposes, the ME-1515 enclosure includes the metal box, AC input, DC output and LED bar.
www.rosslaresecurity.com
1
ME-1515
Enclosure for AC-825IP
Series
Installation Guide
To Next Page
Need help?
General