For after sales service, please contact Cypress Medic Sdn Bhd (www.cypressmedic.com.my)
Rossmax Temple Thermometer HA500
Quick Guide
How to measure temple temperature
1. Always make sure the probe is clean, and without damage.
2. Press “ON/OFF/Memory” button to power on the device.
3. Vertically aim the thermometer at the temple with a distance of less than 5 cm. If the temple is
covered with hair, sweat or dirt, remove the obstacle from the temple to improve the measuring
accuracy.
4. Press the “Start” button to take temperature. Measurement is complete when you hear a long
beep sound.
5. Read the recorded temperature from the LCD display.
6. Clean the probe after each use to ensure an accurate reading and avoid cross contamination.
(See the section of Care and Cleaning for details.)
7. Remember to put in the storage case when not in use.
Remark: Please consult doctor for interpretation of results
Switching between Body Mode and Object Mode
To Next Page
Need help?
General
