What to do if Rossmax MJ 701 f displays EE mark?
If your Rossmax Blood Pressure Monitor displays an EE mark, make sure the cuff is placed correctly. Wrap the cuff properly so that it is positioned correctly. Also, avoid talking or moving during the measurement. Keep your wrist steady and measure again.
How to fix Rossmax MJ 701 f Blood Pressure Monitor with no display?
If there is no display when you press the START/STOP key on your Rossmax Blood Pressure Monitor, the batteries may have run down. Replace them with four new batteries. Also, check if the batteries' polarities have been positioned incorrectly and re-insert them in the correct positions.
Explains the device's intended use for adults and its warranty program.
Explains the oscillometric method used for blood pressure measurement.
Outlines compliance with European regulations and essential standards for the device.
Presents the classification of blood pressure levels for risk identification.
Details the meaning of each indicator and symbol shown on the device's LCD screen.
General| Measurement Method | Oscillometric |
|---|---|
| Display | LCD |
| Accuracy (Pressure) | ±3 mmHg |
| Cuff Size | 24-40 cm |
| Irregular Heartbeat Detection | Yes |
| WHO Indicator | Yes |
| Type | Upper Arm Blood Pressure Monitor |
| Accuracy (Pulse) | +/- 5 % |
| Average Reading | Yes (last 3 readings) |
| Power Source | 4 AA batteries or AC adapter |
| Measurement Range (Pressure) | 30-260 mmHg |
| Measurement Range (Pulse) | 40-199 bpm |
To Next Page
