5
Operation
If you dial a number on the keypad of your mobile phone, it could be possible you hear
the key tones over the speakers. The speakers will remain muted for a period of 2
seconds after you press a key, if you don’t press the next key or “SEND” button within
these 2 seconds, the Mute will be deactivated and the sound of your radio will be heard
over the speakers. If you experience any inconvenience, we advise you to set keysound
to “silent” in your handset menu.
Dial tones and speaker mute note
IMPORTANT: If you arrive at your destination during a call, it may be necessary
to
transfer the call back to your handset. Normally the call will be transferred
back to your handset automatically when you turn off your vehicle, but it is
possible with older mobile phones that the call gets disconnected. To avoid
th
is from happening if you experience this, hold the CARBT Dial button for 4
se
conds until you hear 2 beeps. (Transfer a call to handset on page 3)
After you enter the car and turn the ignition on, the system will link with your phone
connect you have to reconnect using your connection menu in your mobile phone.
Bluetooth
®
Menu,
My Devices
Select CARBT_1234
Options
Connect
Connection
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
To Next Page
Loading...