Rl
8"
Tower
Speaker
Installation
Instructions
Measure the
tubing
you will be mounting . '
your speakers
to
and select the appropriate
plastic insert for your
tubing
diameter.
Place
your plastic insert
into
the
clamp
1.
Remove the safety lanyard from the speaker can.
2.
Wrap the safety lanyard around the tower tube you will
be mounting your speaker
to
and thread the lanyard
through
its
loop
on the end
to
make a self tightening loop.
3.
Re-attach the safetly lanyard
to
the
speaker.
Apply blue
thread lock
to
the screws and tighten.
2.
BLUE
3/32"
Open clamp, position speaker in desired mounting
location, close clamp and install the
two
3/8" -16
screws
with
red threalock and tighten boltS;to 30ft-lbs
to
lock speaker in place. ~-------,r-----~~JfJf::--
~
L[-3-0-ft--lb-s~
www.roswellmarine.com
1
i,-------------------ROSWE
L.L.
To Next Page
