Need help?Do you have a question about the Roswell R1 and is the answer not in the manual?
Guidance on connecting speaker and LED wires to the boat's audio system and power source.
Details on running 18-gauge power and ground wires for RGB LED connections to your power source.
Recommendations for speaker mounting location and internal or external wire management strategies.
Information on clamp inserts for tubing diameters and important audio safety precautions.
Table detailing speaker wire harness connections for fixed colors or controllable RGB output.
Instructions for preparing wires by removing shrink wrap and cutting insulation.
Guidance on selecting a mounting spot and choosing between rotated or square clamp positions.
Steps to remove the speaker from its can to access mounting bolts and wiring.
Instructions for adjusting the clamp angle adapter for the required installation angle.
Steps for re-installing the speaker, plugging in the harness, and securing with screws.
Selecting and inserting the correct plastic clamp insert based on tubing diameter.
Instructions for closing the clamp and tightening screws to lock the speaker in place.
Verifying clearance with tower accessories before fully tightening clamp set screws.
Guidance on setting crossover frequencies with and without a subwoofer.
Recommendations for cleaning, maintenance, and regularly checking bolt tightness.
Details on the two-year warranty, coverage, exclusions, and claim procedures.
General| HF Driver Type | Silk Dome |
|---|---|
| Enclosure Type | Bass Reflex |
| Type | Studio Monitor |
| HF Driver Size | 1" |
| Input Connectors | XLR, RCA |
| Weight | 4.8kg (10.6 lbs) |
To Next Page
