Rotair MDVN 71 AP User Manual

3
SUBJECT INDEX
1) Identification data _
2) Technical data _
3) Manual use and consultation _
4) Envisaged machine use _
5) Technical description of machine and its function _
5.1) Chassis and axle _
5.2) Bodywork _
5.3) Motor _
5.4) Compression unit _
5.5) Oil separator tank _
5.6) Bell and flexible coupling _
5.7) Control instruments and devices _
5.8) Wiring system and its function _
5.8.1) Safety devices _
5.9) Oleopneumatic plant and its function _
5.9.1) Lubrication circuit _
5.9.2) Pneumatic circuit _
5.9.3) Automatic regulation of the motor speed _
6) Machine handling and parking _
6.1) Lifting instructions _
6.2) Towing instructions _
6.3) Transport instructions _
6.4) Parking instructions _
7) Instructions for machine use _
7.1) Before starting the machine. Check the motor and compressor oil levels _
7.2) Starting up _
7.3) During the working stage _
7.4) Stopping _
7.5) After machine stop _
8) Machine setting and tuning _
8.1) Checking and setting of motor speeds _
8.2) Checking and setting of maximum final pressure _
8.3) Checking and setting of minimum pressure _
8.4) Safety valve check _
9) Maintenance programme _
9.1) Daily checks _
9.2) Weekly checks _
9.3) Three-monthly checks _
9.4) Annual checks or when total number of hours is reached _
10) Periodic maintenance _
10.1) Checking and cleaning of air suction filter _
10.2) Battery check _
10.3) Tyre pressure check _
10.4) Cooling radiator cleaning _
10.5) Checking and cleaning of the oil recovery nozzle _
10.6) Fuel tank drainage _
10.7) Braking device check _
10.8) Wheel screw checking _
10.9) Compressor oil filter replacement _
10.10) Compressor oil replacement _
10.11) Checking and replacement of the oil separator element _
11) Problems : causes and remedies _
12) Spares_

Rotair MDVN 71 AP Specifications

General

Brand	Rotair
Model	MDVN 71 AP
Category	Air Compressor
Language	English