Rotel RC-1070 Technical Manual

Technical
Manual
STEREO CONTROL AMPLIFIER
RC-1070
Table of Contents
Specification
Specification...................................... 1
Parts List ........................................... 2~3
Case Outlines.................................... 4
Safety Caution................................... 4
PCB Assembly .................................. 5~6
Schematic Diagram .......................... 7~10
Total Harmonic Distortion (20 Hz-20 kHz) < 0.006%
Intermodulation Distortion < 0.006% at 1 V output (60 kHz:7 kHz, 4: 1 )
Input Sensitivity / Impedance Line Level: 150 mV / 24 kOhms
Phono (MM): 1.2 mV / 68 kOhms
Output Level/Impedance 1 V / l00 Ohms
Usable Headphone Impedance 8 - 2,000 Ohms
Frequency Response Line Level : 4 Hz - 100 kHz, +0, -3dB
Phono: 20 Hz - 20 kHz, ±0.5 dB
Signal to Noise Ratio (IHF "A" weighted) Line Level: 95 dB
Phono: 70 dB
Phono Overload: 70 mV
Power Requirements USA: 115 Volts, 60 Hz
CE: 230 Volt, 50 Hz
Power Consumption 10 Watts
Dimensions (W x H x D) 430 x 92 x 344 mm
17" x3
5/8
" X 13
5/8
"
Weight (net) 5.4 kg, 11.9 lbs.
SHINSEN-BLD. 4F 10-10 SHINSEN-CHO, SHIBUYA-KU,
TOKYO 150-0045, JAPAN
Serial. NO.
Beginning
®
Quality Uncompromised
Y-332A-00115C/S-S

Rotel RC-1070 Specifications

General

Type	Stereo Preamplifier
Input Sensitivity	150mV
Input Impedance	24k ohms
Output Impedance	100 ohms
Total Harmonic Distortion	0.004%
Signal to Noise Ratio	100dB