To Next PageTo Next Page
Need help?Do you have a question about the Rotel RC-972 and is the answer not in the manual?
General| Type | Stereo Preamplifier |
|---|---|
| Frequency Response | 4Hz - 100kHz ±1dB |
| Total Harmonic Distortion | 0.004% |
| Signal to Noise Ratio | 100dB |
| Input Sensitivity | 150mV |
| Input Impedance | 24k ohms |
| Output Level | 1V |
| Output Impedance | 100 ohms |
Warnings and precautions for electric shock, fire, moisture, and proper connection.
Instructions on ventilation, placement, power cord handling, and cleaning.
Guidelines for safe handling, placement, and avoiding interference.
Advice on cable selection and operating the remote control unit.
Details on connecting the RC-972 to power amplifiers.
Connecting various audio sources like CD players and tuners.
How to connect tape decks or recorders for playback and recording.
Connecting to power, using standby mode, and auxiliary outlets.
Understanding the power switch and indicator light.
Information on the switched power outlets for accessories.
Using volume, bass, treble, and tone controls for sound shaping.
Selecting audio sources and monitoring tape recordings.
Temporarily muting sound and connecting headphones for private listening.
Guidance on setting up for recording with a tape monitor.
Information on installing an optional board for phono input.
Solutions for power indicator, no sound, and fuse replacement problems.
Detailed performance metrics, power requirements, and dimensions.
