Need help?Do you have a question about the Rotenso AIRMI Series and is the answer not in the manual?
General| Brand | Rotenso |
|---|---|
| Model | AIRMI Series |
| Category | Controller |
| Language | English |
Explains the meaning of safety symbols used in the manual for hazard identification.
Provides essential safety instructions for users, including operation and child safety.
Details the physical layout and buttons of the wired controller interface.
Explains the various status indicators and symbols displayed on the controller screen.
Describes the different screen layouts available for daily usage monitoring.
Provides a general explanation of the menu's purpose and navigation structure.
Guides users on how to enter the main menu from the home page.
Explains how to use navigation buttons to move within menus and select options.
Details how to lock and unlock the controller screen to prevent unauthorized access or accidental changes.
Instructions on how to switch the heating/cooling and DHW modes on and off via the interface.
How to change the desired temperature setpoints using the controller interface.
Guides users on selecting between HEAT, COOL, and AUTO operating modes.
Refers to section 5.4 for adjusting space operation modes.
Explains how to preset water flow temperatures based on outside air conditions for energy saving.
How to activate the disinfection cycle to kill legionella bacteria at specified temperatures.
Instructions for controlling the domestic hot water pump's operation.
How to set specific times for heating, cooling, or DHW operation with defined modes and temperatures.
How to schedule operations for different days of the week with common settings.
How to view programmed schedules and how to cancel timer and weekly schedules.
How to activate silent mode to reduce unit noise, which may affect heating/cooling capacity.
How to set a holiday period to prevent freezing and resume normal operation before the end of the holiday.
How to enable the backup heater for additional heating support.
How to manually initiate the defrost cycle for the unit when operating in heat or DHW mode in winter.
Lists the sub-sections available within the service guide menu for diagnostics and maintenance.
Steps to navigate to the service guide section and view fault codes and details.
Allows installers to view various operating parameters of the unit for diagnostics and analysis.
Explains the purpose of this menu for advanced settings and configuration.
Guides users on how to enter the function parameter settings menu, requiring a password.
How to safely exit the function parameter settings menu after making changes.
Indicates this section is for factory use only and not for end-users.
Instructions for configuring the wired controller's network settings, including AP mode.
Guides on connecting the controller to a mobile device via the app for wireless control and setup.
Provides a visual map of the controller's menu hierarchy for understanding navigation paths.
To Next Page
