Need help?Do you have a question about the Rotenso CONTROL Series and is the answer not in the manual?
Important safety warnings for installation and operation to prevent hazards.
Notes regarding operation, installation environment, and electrical safety.
Guidance on choosing a suitable location for installation to prevent malfunction.
List of parts to confirm before installation, including wire controller and manual.
Provides dimensions of the wired remote controller for installation planning.
Instructions on how to detach the upper casing of the wired controller.
Steps for securing the controller's back plate to the wall or switch box.
How to connect the wired controller to the indoor unit's HA and HB terminals.
Important notes on preventing water entry and securing wires.
Instructions on how to turn the unit on and off.
How to select the desired operating mode (Auto, Cool, Dry, Heat, Fan).
How to activate and deactivate the 8° heating function on supported models.
Details on setting room temperature, fan speed, and keypad tone.
How to activate and deactivate the child lock to prevent accidental changes.
Operating instructions for Up-Down and Left-Right swing features.
How to activate and use the sleep mode for energy saving.
How to activate and deactivate the turbo mode for rapid cooling or heating.
How to enable the function that detects temperature at the controller's location.
Explains the operation of rotation and backup for dual unit systems.
Step-by-step guide to program the timer for turning the unit on or off.
Instructions for setting both start and stop times for the unit's operation.
How to set the off-time for the weekly timer.
Instructions on activating, deactivating, and managing the weekly timer.
How to designate specific days as holidays or off days within the weekly timer.
How to set a delay for the unit's operation, such as delayed shut-off.
Instructions for copying timer settings from one day to another.
Steps to set the specific time, operation mode, and room temperature.
How to select the fan speed for the scheduled events.
Activating, canceling weekly timers and setting holidays.
Instructions for copying settings from one day to another for Weekly Timer 2.
Adjusting temperature readings for the Follow Me function.
Setting the maximum and minimum temperature limits for operation.
Enabling or disabling remote control signals for the unit.
Setting the address for two-line controller configurations.
Instructions on how to reset the controller to its default factory settings.
Important safety warnings for installation and operation to prevent hazards.
Notes regarding operation, installation environment, and electrical safety.
Guidance on choosing a suitable location for installation to prevent malfunction.
List of parts to confirm before installation, including wire controller and manual.
Provides dimensions of the wired remote controller for installation planning.
Instructions on how to detach the upper casing of the wired controller.
Steps for securing the controller's back plate to the wall or switch box.
How to connect the wired controller to the indoor unit's HA and HB terminals.
Important notes on preventing water entry and securing wires.
Instructions on how to turn the unit on and off.
How to select the desired operating mode (Auto, Cool, Dry, Heat, Fan).
How to activate and deactivate the 8° heating function on supported models.
Details on setting room temperature, fan speed, and keypad tone.
How to activate and deactivate the child lock to prevent accidental changes.
Operating instructions for Up-Down and Left-Right swing features.
How to activate and use the sleep mode for energy saving.
How to activate and deactivate the turbo mode for rapid cooling or heating.
How to enable the function that detects temperature at the controller's location.
Explains the operation of rotation and backup for dual unit systems.
Step-by-step guide to program the timer for turning the unit on or off.
Instructions for setting both start and stop times for the unit's operation.
How to set the off-time for the weekly timer.
Instructions on activating, deactivating, and managing the weekly timer.
How to designate specific days as holidays or off days within the weekly timer.
How to set a delay for the unit's operation, such as delayed shut-off.
Instructions for copying timer settings from one day to another.
Steps to set the specific time, operation mode, and room temperature.
How to select the fan speed for the scheduled events.
Activating, canceling weekly timers and setting holidays.
Instructions for copying settings from one day to another for Weekly Timer 2.
Adjusting temperature readings for the Follow Me function.
Setting the maximum and minimum temperature limits for operation.
Enabling or disabling remote control signals for the unit.
Setting the address for two-line controller configurations.
Instructions on how to reset the controller to its default factory settings.
General| Brand | Rotenso |
|---|---|
| Model | CONTROL Series |
| Category | Controller |
| Language | English |
To Next Page
