Rotenso CONTROL Series - Reattaching the Controller; Specifications

LOKA HAHB remote control
EN
62
Installation and user manual
6. Reattach the upper part of the wired controller
• After adjusting the upper case and then buckle the upper case; avoid clamping the
wiring during installation. (Fig 3-11)
All the pictures in this manual
are for explanation purpose
only. Your wire controller may
be slightly dierent .The actual
shape shall prevail.
Fig. 3-11
Input voltage DC 12V
Ambient temperature -5~43ºC (23~110ºF)
Ambient humidity RH40%~RH90%
4. SPECIFICATION
Wiring specications
Wiring type Size Total length
shielded vinyl cord or
cable
0.5mm
2
≤20m (66’)
0.75-1.25mm
2
≤50m (164’)