LOKA HAHB remote control
EN
53
Installation and user manual
NOTE
• The specied cables shall be applied in the wiring. No external force may be applied
to the terminal. Otherwise, wire cut and heating may occur and result in re.
2. INSTALLATION ACCESSORY
Select the installation location
Don’t install at the place where cover with heavy oil, vapor or sulfureted gas, otherwise,
this product would be deformed that would lead to system malfunction.
Preparation before installation
1. Please CONFIRM that all the following parts you have been supply:
No. Name Qty. Remarks
1 Wire controller 1 -
2 Installation and owner’s manual 1 -
3 Screws 3 M3.9X25 (For Mounting on the Wall)
4 Wall plugs 3 For Mounting on the Wall
5 Screws 2 M4X25 (For Mounting on switch box)
6 Plastic screw bars 2 For xing on switch box
7 Battery 1 -
8 The connective wires group 1 Optional
9 Screw 1
M4X8 (For Mounting the connective wire
group)
To Next Page
Loading...
