Rotenso CONTROL Series - Fault Handling; Technical Requirements

LOKA HAHB remote control
EN
91
Installation and user manual
13. FAULT ALARM HANDING
If the system does not properly operate except the above mentioned cases or the above
mentioned malfunctions is evident, investigate the system according to the following
procedures.
No. Malfunction & protection dene Display digital tube
1
Error of communication between wire controler
and indoor unit
The error displayed on the wire controller are dierent from those on the unit. If error
code appears, please check the <<Owner’s And Installation Manual>>and<<SERVICE
Manual>>.
14. TECHNICAL INDICATION AND REQUIREMENT
EMC and EMI comply with the CE certication requirements.